相关文章

浙江升降平台谈升降机的支腿的分类

液压升降机是很多公司使用的一种液压工具,为了可以更结实的操作升降机,作业人员会添加各种款式的液压支腿,下面说一下支腿的分类到底有哪些呢?

1、蛙式支腿这种支腿的活动支腿铰接在固定支腿上,其展开动作由液压缸完成,特点是结构简单、重量较轻,但支腿跨度不大,只适用于小吨位的起重机。

This frog legs legs legs of activity in the fixed leg of the hinge, which launched the action is completed by a hydraulic cylinder, is characterized by simple structure, light weight, but little leg span is only applicable to small tonnage cranes .

2、H型支腿这种支腿在液压升降机中并不常用,有两个液压缸。活动支腿伸出后,工作时垂直腿撑地,形如H而得名。特点是支腿跨距较大,对场地适应性较好,目前已被广泛采用。

H-leg of this leg is not commonly used in hydraulic lifts, there are two hydraulic cylinders. Legs stretched out after the event, the vertical leg stays at work, shaped like H named. Is characterized by a large outrigger span, better adaptability for the venue, has been widely adopted.

3、X型支腿这种支腿工作时,支腿呈X型,重物活动的空间比H型支腿要大,因此常和H型支腿混合使用,形成前H、后X的型式。

When the X-type legs that leg work, leg was X-type, space heavy activity larger than the H-type legs, so often, and H-type outriggers mixed use, before the formation of H, after X of the type.

4、辐射式支腿以转台的回转中心为中心,从车架的盆形架向下呈辐射状向外伸出4个支腿。特点是稳定性好,在起重作业时主要应用在一些特大型的起重机上。

Radiant legs to the center of rotation of the turntable as the center of the bowl-shaped frame from the frame down radially outwardly four legs. Is characterized by good stability when lifting operation is mainly used in some of the large crane.

5、摆动支腿这种支腿在起重作业时,支腿在液压缸的作用下能摆动到与车架纵向轴线相垂直的位置上;非工作状态时,支腿不能太长,所以横向支撑的间隔较小。

This swinging leg during the lifting operation the legs, the legs under the effect of the hydraulic cylinder and the frame can be swung to a position perpendicular to the longitudinal axis of the upper; non-operating state, the legs can not be too long, so that the lateral support interval small.